Sai Technology

Bawana, New Delhi, Delhi

GST No. 07CKOPS6061D1ZV

Send Email
0804861318477% Response Rate
Search

Home » Our Products » Clean Room Equipment


Clean Room Equipment

Pioneers in the industry, we offer Bio Safety Cabinet, Dynamic Pass Box, Static Pass Box, Fume Hood, Dispensing Booth and Biosafety Cabinet Class III from India.

 


Cleanroom Air Shower

REQUEST CALLBACK

Cleanroom Air Shower
  • Cleanroom Air Shower
  • Cleanroom Air Shower
  • Cleanroom Air Shower
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2.55 Lakh / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
BrandSaiclave
Usage/ApplicationLaboratory
Materialstainless steel
Frequency50-60 hz
Operation Time0-9, 990 second
Voltage415 V
BlowerCentrifugal lubricated bearing type ISI marked Assembly
Air Velocity16-22 m/s
Noise LevelLess then >65 db
Door OpeningFront door right side, back door ledt side
Working Area800x800x1900 mm

Air Shower features the use of mild steel powder coated in stainless steel 304-grade finish. Work in the form of self-contained modular system, the shower is designed for delivering a spray of moving air from nozzles. These are easy and convenient in transportation and supports installation virtually at any site. Further, the presence of absolute filter-fan module also offers positive pressurization as well as filtration support down to 99.97% efficiency on 0.3 microns.
 
Features :

Clean air present inside the shower supports a high degree of sterility as well as clean air conditions

System supplied with optionally aluminum grated floor placed around 6 inches above the datum level

Featuring duct air chassis installed within walls of units

The system provided with two aluminum framed glass/acrylic door support with automatic locking device Both doors in an automatically locked position while the system is in operation

Provision of unlocking of doors in event of power failure or emergencies

Pre-filter support that provides for statically/dynamically balanced air and throwing it through HEPA filter into chamber

Statically & Dynamically balanced Motor-blowers with suspension arrangement to reduce noise level for suction and booster

Differential Pressure Gauge: 1 No.

ON/OFF Switches

DOP Test Port

5/15 Amp Switch Socket for external equipment

Control Systems – to ensure that both the doors cannot open at the same time & to ensure that both the doors will be locked during the time air flow is on.

Timer for setting Air Shower operation time (settable for 30 seconds to 5 minutes)

Emergency STOP

Straight Entry – Straight Exit / 90o Door Opening

Automatic as well as Manual Mode

 
Two Stage filtration :

EU6 - Prefilter (95% down to 5 microns) for return air & fresh air intake

EU14 - HEPA Filter (99.999% down to 0.3 microns) at the supply position

SS 304 doors with double walled flush glass view panels & door closer

Yes! I am Interested

Static Pass Box

REQUEST CALLBACK

Static Pass Box
  • Static Pass Box
  • Static Pass Box
  • Static Pass Box
  • Static Pass Box
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 45,000 / PieceGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Piece
Product Typeclean air equipment
Usage/ApplicationLaboratories
Size24x24x24
MaterialStainless steel
ShapeRectangular
BrandSaiclave
Voltage220/230V
Frequency50/60 Hz
PhaseSingle phase

Static Pass Box is designed to provide functional support of controlling ingress of particulate contamination in clean room environment as well as in other controlled environment. Further, these pass boxes also allows materials to be efficiently transferred into controlled environment without need of personnel movement. Finding suitability for protecting external environment from egress of contamination, these are perfectly suitable for biological safety laboratory applications.


Features :

  • System coming with suitable electromechanical interlock facility that makes these delivers reliable as well as maintenance free functioning
  • Supporting the demands of maintaining clean room integrity through preventing both doors from being simultaneously opened
  • Stainless steel 304 grade based main body construction
  • Internal construction of also featuring stainless steel construction that makes work zone easy to clean as well as maintain
  • Transparent door provision also offering for clear view of internal chamber
  • Comes fitted with support of UV lamp for managing germicidal activities
  • Coming with indication of door opening and closing
  • Pass box constructed using mild steel powder coated, wooden laminated or stainless steel finish options
  • System made available in static & dynamic model finish
  • Dynamic model featuring support of HEPA filters.
Yes! I am Interested

Bio Safety Cabinet

REQUEST CALLBACK

Bio Safety Cabinet
  • Bio Safety Cabinet
  • Bio Safety Cabinet
  • Bio Safety Cabinet
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1.25 Lakh / UnitGet Latest Price

Product Brochure
Product Details:
Minimum Order Quantity1 Unit
BrandSaiclave
Usage/ApplicationLaboratory
MaterialStainless steel
Air FlowUNIDIRECTIONAL
Model Name/NumberSAI-231
Size2x2,3x2,4x2,6x2

Other Deatils:
  • 30 % air exhaust
  • 70 % air recirculation
  • HEPA-filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection.
  • HEPA-filtered downflow air is a portion of mixed downflow and inflow air from a common plenum
  • Negative Pressure air surrounding all biological contaminated ducts and plenums
  • Negative pressure surrounds the work area with double wall plenums for protection
  • Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and large. The highly efficient HEPA filter maintains the optimum cleanliness and purity. Being equipped with the prefilter, it can extend the life of HEPA filter
  • Aerodynamic airflow grills maintain safety and prevents blockage
  • U.V and fluorescent interlock available.
  • Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue
  • Sash is counterbalanced for smooth and light weight operation with standard opening of 200mm ±10 mm for easier access to work zone and enhanced user safety

Additional Information:

  • Delivery Time: 15-20 days
  • Packaging Details: as per customer required
  • Yes! I am Interested

    Laminar Air Flow

    REQUEST CALLBACK

    Laminar Air Flow
    • Laminar Air Flow
    • Laminar Air Flow
    • Laminar Air Flow
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 80,000 / UnitGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Unit
    TypeHorizontal
    Surface FinishPowder Coated
    BrandSaiclave
    MaterialStainless Steel 304
    IlluminationFluorescent Lamp 40W
    Frequency50-60 Hz
    Model Name/NumberSAI-161
    Front doorMade of plexi Glass (Polycarbonate Door Optional)
    UtilityGas/Air cock and multipoint 15/5 Amp
    Main filterHEPA filter (99.97% efficient at 0.3 micron particle)
    PrefilterHigh efficiency prefilter
    SterilizingUV Germicidal Tube.

    It is used for various works that require maintenance of the cleanliness and purity like plant tissue culture, examination and experimentation of precision electronics parts, medical sciences, pharmacy, agriculture sector and the like.

    • Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
    • Cabinets is fabricated of Wooden board laminated with sunmica OR cold rolled steel / PCGI duly powder coated OR stainless steel (SS-304grade) (as ordered).
    • Working table is made of Stainless Steel Sheet (SS-304 grade).
    • Side panels and front doors are made out of thick transparent plexi glass.
    • Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and larger.
    • Heavy Duty Motor operates with minimum noise level.
    • Working area is illuminated by fluorescent lighting fitted to the unit.
    • Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
    • The highly efficient HEPA filter maintains the optimum cleanliness and purity.
    • The prefilter fitted extends the life of HEPA filter drastically.
    • Silent Vibration-Free Blower ensures noiseless operation and anti-vibration construction provides efficient working environment.
    • Interlocking of U.V. Germicidal Tube & Fluorescent Light with auto switch off/on Mode for blower when the door is closed/open.
    • All units with MOC : Wooden/CRC/Stainless Steel are mounted on a heavy duty mild steel stand duly powder coated.
    • To work on 220/230 volts A.C. supply.

    Technical Specifications Ordering Informations

    • MODEL#SAI-22#SAI-32#SAI-42#SAI-62#SAI-82Internal Workzone Dimension (LxDxH) (mm)
    • 600x600x600900x600x6001200x600x6001800x600x6002400x600x600
    • MOC (CABINET): Wooden or Cold Rolled Steel (Powder Coated)/ PCGI or Stainless Steel (SS-304)
    • Work Table: Stainless Steel (SS-304 grade)
    • NO. of HEPA Filter: 1 /1 / 1 / 2 / 2


    Options:

    • Front door made of Toughned Glass  (Tempered) in lieu of plexi glass.
    • MODEL#SAI-22(H)#SAI-32(H)#SAI-42(H)#SAI-62(H)#SAI-82(H)
    • Magnehelic Gauge (To track filter pressure) in lieu of static pressure manometer.
    • Electronic Filter choke alarm. (Differential pressure monitor)
    • ULPA FIlter in liew of Hepa Filter.
    • Model #SAI-22(U)#SAI-32(U)#SAI-42(U)#SAI-62(U)#SAI-82(U)

    Microprocessor LCD Controller with Auto Switch off mode for motor blower when door is closed. Digital buzzer timer sounds an audio alarm in completion of sterilizing time of the chamber and the switches off U.V. germicidal tune and automatically switches ON the fluorescent light, alerting the user that the bench is ready for use.

    Yes! I am Interested

    Laminar Air Flow Vertical

    REQUEST CALLBACK

    Laminar Air Flow Vertical
    • Laminar Air Flow Vertical
    • Laminar Air Flow Vertical
    • Laminar Air Flow Vertical
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 95,000 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    TypeVertical
    Surface FinishPolished
    MaterialStainless steel
    Efficiency99.97%
    BrandSaiclave
    Usage/ApplicationLaboratory
    Voltage220 V AC
    Noise Level> 65 DB
    Working Area2x2 , 3x2 , 4x2 , 6x2
    I Deal InNew Only
    Country of OriginMade in India

    We are one of the trusted names to offer Vertical Laminar Air Flow for our valued clients. Provided range of product is made from high-grade quality raw material. Offered products are widely used in various industries. The offered range of products is highly appreciated and demanded by our clients. Customers can avail these products at the leading price from us in the market.

    Features:
    • Sturdy construction
    • Low maintenance
    • Corrosion resistance

    Other Details:
    • Unit comes fitted with pre-filter as well as HEPA filter support as well as fluorescent light, UV germicidal tube, gas cock and manometer support for efficient performance delivery
    • Air is drawn through pre-filter passed through efficient working HEPA filters with efficiency ratings that are as high as 99.99% which supports retaining airborne particles of size 0.3 micron as well as larger
    • The blower as well as motor assembly of machine featuring the use of statically & dynamically balanced motor of 1/4 h.p. capacity
    • A motor designed to deliver performance with minimum noise levels
    • Main filter support provided in form of HEPA Filter
    • Pre-filter support provided in form of washable synthetic Pre-Filter options
    Yes! I am Interested

    Biosafety Cabinet Class III

    REQUEST CALLBACK

    Biosafety Cabinet Class III
    • Biosafety Cabinet Class III
    • Biosafety Cabinet Class III
    • Biosafety Cabinet Class III
    • Biosafety Cabinet Class III
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.8 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    TypeVertical
    ModelSAI-231
    Nominal Size3 ft
    ClassClass III
    MaterialStainless steel
    BrandSaiclave
    Air Flow DirectionVertical
    Voltage220 V
    Usage/ApplicationLaboratory
    Frequency50/60 Hz
    Power SupplyElectric
    I Deal InNew Only
    Country of OriginMade in India

    We designed to provide personnel, environmental and product protection. Air flow is drawn around the operator into the front grille of the cabinet, which provides personnel protection.

    In addition,100% exhaust 0 % recirculation it is contaminant-free (environmental protection).


    All Class III cabinets are designed for work involving microorganisms assigned to biosafety levels 1, 2 and 3. Class II cabinets provide the microbe-free work environment necessary for cell culture propagation, and also may be used for the formulation of nonvolatile antineoplastic or hemotherapeutic drugs. biosafe is available in powder coated Mild Steel, SS 304 / SS 316 / SS 316L or a combination of both.


    Pre filter S.S. work table Manometer, U.V. Tube Recirculated System 70% Air throw HEPA filter 30% by Exhaust.

     

    Specifications:

    • Two Stage filtration : EU6 - Intermediate Filter (95% down to 6 micron), EU14 - HEPA Filter - Supply / Exhaust (99.999% down to 0.3 micron)
    • Statically & Dynamically balanced Motor-blower with suspension arrangement to reduce noise level
    • Double walled flushed Glass Side Panels
    • SS 304 work table with perforations at front & back which can be removed occasionally for cleaning purpose
    • 1-piece fully openable sliding toughened glass front door with counterweight arrangement
    • Sealed Fluorescent Lights with Milky White Diffuser
    • Differential Pressure Gauges : 1 Nos.
    • ON/OFF Switches for motor & Lights
    • Clean Down Timer with Operation HOLD indicator
    • Alarm triggers in case front door is raised more than 8 inch (i.e. safe clear opening during operation)
    • DOP Test Port
    • 5/15 Amp Switch Socket for external equipment
    • SS 304 stands with leveling lugs
    • SS 304 1 ft long elbow duct for exhaust

    Additional Information:

  • Delivery Time: 10-15 days
  • Yes! I am Interested

    Horizontal Laminar Air Flow SAI-LAF-H-012

    REQUEST CALLBACK

    Horizontal Laminar Air Flow SAI-LAF-H-012
    • Horizontal Laminar Air Flow SAI-LAF-H-012
    • Horizontal Laminar Air Flow SAI-LAF-H-012
    • Horizontal Laminar Air Flow SAI-LAF-H-012
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.15 Lakh / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    BrandSaiclave
    TypeHorizontal
    MaterialStainless steel
    Usage/ApplicationLaboratory
    Voltage220 V
    Frequency50Hz
    Working Area4x2
    Country of OriginMade in India

    Applications:

    Laminar flow cabinet (horizontal / vertical) designed so as to meet the requirements of US federal standard 209 B (BS 5295) providing particle free air to meet class 100 conditions. The unit is fitted with pre-filter and HEPA filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA filters having efficiency rating as high as 99.99% with cold DOP & 99.97% with hot DOP thus retaining all air-borne particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ISI marked motor of 1/4 HP capacity operates with minimum noise level less than 60 dB on a Scale.

    Sailent features:
    • The cabinet are fabricated of thick mild steel / stainless steel laminated by cold rolled steel duly powder coated or SS as per requirement
    • Work table is made of SS with mirror finish which makes it easy to clean, washable & chemical resistive, corrosive free, Leak proof construction.
    • Side panels are made out of thick transparent plexus glass / acrylic sheet duly framed
    • High efficiency pre filter
    • HEPA filter efficiency- 99.99% with cold DOP & 99.97% with hot DOP thus retaining all air-borne particles of size 0.3 micron
    • Pressure manometer to gauge the pressure drop in the unit
    • Built in two number U.V. Germicidal Light for disinfection and fluorescent light for work space illumination (60 W, 800 Lumens)
    • Utility- gas/air cock and multi point electric socket.
    • Transparent UV protected front door glass.
    • Air flow Rate: 0.35 to 0.75 m/sec.
    • Velocity should be: Approx. 90-100* FPM higher velocity available on request

    Additional Information:

  • Delivery Time: 15-18 Day's
  • Yes! I am Interested

    Dynamic Pass Box

    REQUEST CALLBACK

    Dynamic Pass Box
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 40,000 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Product TypeClean air equipment
    Usage/ApplicationLaboratories
    Size24x24x24
    Materialstainless steel
    ShapeRectangular
    BrandSaiclave
    Voltage220/230V
    I Deal InNew Only
    Country of OriginMade in India

    Dynamic Pass Box is designed to provide functional support of controlling ingress of particulate contamination in clean room environment as well as in other controlled environment. Further, these pass boxes also allows materials to be efficiently transferred into controlled environment without need of personnel movement. Finding suitability for protecting external environment from egress of contamination, these are perfectly suitable for biological safety laboratory applications. 


    Features :

    • System coming with suitable electromechanical interlock facility that makes these delivers reliable as well as maintenance free functioning
    • Supporting the demands of maintaining clean room integrity by preventing both doors from being simultaneously opened
    • Stainless steel 304 grade based main body construction
    • The internal construction of also featuring stainless steel construction that makes work zone easy to clean as well as maintain
    • Transparent door provision also offering for the clear view of the internal chamber
    • Comes fitted with the support of UV lamp for managing germicidal activities
    • Coming with an indication of the door opening and closing
    • Pass box constructed using mild steel powder coated, wooden laminated or stainless steel finish options
    • The system made available in static & dynamic model finish
    • A dynamic model featuring support of HEPA filters

     

    Yes! I am Interested

    Static Pass Box

    REQUEST CALLBACK

    Static Pass Box
    • Static Pass Box
    • Static Pass Box
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 65,000 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Usage/ApplicationLaboratories
    MaterialStainless steel
    ShapeRectangular
    BrandSaiclave
    Voltage220 V
    Frequency50 Hz
    PhaseSingle Phase
    Model Name/NumberSAI PB-350
    Number Of Door2
    Power SourceElectric
    I Deal InNew Only
    Country of OriginMade in India

    Applicatons:
    We are the most trusted Dynamic/Static Pass Box Manufacturer, Supplier and Exporter from India. Our precision-engineered Dynamic Pass Box assists in transfer of materials driven through a controlled environment but without much personnel movement. Furthermore, this box helps in prevention of contaminants entrance either in the clean room or between various classified areas. Dynamic/static Pass Box that we deliver in the market is accessible at most economical prices.
    Specifications:
    Used for transfer of material from and into the clean room without contaminating the clean room air and without opening the clean room door. Equipment under this schedule conform BIS certification standards, approve of which shall have to be submitted along with the bid.
    MOC : SS 202/304
    Velocity 90-110 FPM at filter face
    Casing :- Factory extruded AL section.
    Doors:- Double walled sand witched door with glass view window with support SS frame, handles, hinges and gasket on both sides.
    Electromagnetic door interlocking with indicating lamp on both side.
    Fluorescent light and the motor blower unit or automatically put on at the time of opening any one of the door.
    Clean air through HEPA filter is put ON immediately automatically opening any door
    Inter locking arrangement to put OFF UV light if either door opens and ensures that door will remains lock if blower fail.
    Provision of UV light to switched ON and OFF from the outside switch UV light should be permanently OFF unless switched ON.
    Magnetic latch for both door even after power failure door will be lock.


    Additional Information:

  • Delivery Time: 10-15 Days
  • Yes! I am Interested

    Cross Over Bench

    REQUEST CALLBACK

    Cross Over Bench
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 25,000 / PieceGet Latest Price

    Product Details:
    Minimum Order Quantity1 Piece
    Usage/Applicationclean Room Lab
    MaterialStainless Steel
    Height3 feet
    shapeRectangular
    Width350 mm
    No of shelves1
    BrandSaiclave
    Country of OriginMade in India

    We have been counted amongst the most trusted names in this domain, engaged in offering standard quality range of SS Cross Over Bench.

     

    Features:

    • Sturdy design
    • Impeccable quality
    • High spacious
    • With customize sizes

    Additional Information:

  • Delivery Time: 10-15 Days
  • Yes! I am Interested

    Clean Room Pass Box

    REQUEST CALLBACK

    Clean Room Pass Box
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 60,000 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Usage/ApplicationLaboratories
    MaterialStainless steel
    ShapeRectangular
    BrandSaiclave
    Voltage220 V
    Frequency50 Hz
    PhaseSingle Phase
    Model Name/NumberSAI PB-500
    Number Of Door2
    Power SourceElectric
    I Deal InNew Only
    Country of OriginMade in India

    Applicatons:
    We are the most trusted Dynamic/Static Pass Box Manufacturer, Supplier and Exporter from India. Our precision-engineered Dynamic Pass Box assists in transfer of materials driven through a controlled environment but without much personnel movement. Furthermore, this box helps in prevention of contaminants entrance either in the clean room or between various classified areas. Dynamic/static Pass Box that we deliver in the market is accessible at most economical prices.
    Specifications:
    Used for transfer of material from and into the clean room without contaminating the clean room air and without opening the clean room door. Equipment under this schedule conform BIS certification standards, approve of which shall have to be submitted along with the bid.
    MOC : SS 202/304
    Velocity 90-110 FPM at filter face
    Casing :- Factory extruded AL section.
    Doors:- Double walled sand witched door with glass view window with support SS frame, handles, hinges and gasket on both sides.
    Electromagnetic door interlocking with indicating lamp on both side.
    Fluorescent light and the motor blower unit or automatically put on at the time of opening any one of the door.
    Clean air through HEPA filter is put ON immediately automatically opening any door
    Inter locking arrangement to put OFF UV light if either door opens and ensures that door will remains lock if blower fail.
    Provision of UV light to switched ON and OFF from the outside switch UV light should be permanently OFF unless switched ON.
    Magnetic latch for both door even after power failure door will be lock.


    Additional Information:

  • Delivery Time: 10-15 Days
  • Yes! I am Interested

    Laboratory Fume Hood

    REQUEST CALLBACK

    Laboratory Fume Hood
    • Laboratory Fume Hood
    • Laboratory Fume Hood
    • Laboratory Fume Hood
    • Laboratory Fume Hood
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 95,000 / UnitGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Unit
    Usage/ApplicationLaboratory
    BrandSaiclave
    MaterialEpoxy Coated Aluminum
    Voltage115 V
    Weight55.38 kg
    Automation TypeAutomatic
    Frequency50-60 Hz
    Flow Rate310 cfm
    Liner MaterialFiberglass

    We at Sai tech have been manufacturing Laboratory Fume Hood over a decade now. Our fume hoods are indispensable and per-requisite; practically in all chemical laboratories that handles toxins and hazardous chemical fumes and effluents. Our fume hoods capture the fumes/effluents released during any given experiment, contain them in the enclosure and then emit through their well designed exhaust system.


    Additional Information:

  • Delivery Time: 15-20 days
  • Yes! I am Interested

    Dispensing Sampling Booth

    REQUEST CALLBACK

    Dispensing Sampling Booth
    • Dispensing Sampling Booth
    • Dispensing Sampling Booth
    • Dispensing Sampling Booth
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1.1 Lakh / PieceGet Latest Price

    Product Details:
    BrandSaiclave
    Usage/ApplicationLaboratory
    MaterialStainless Steel
    Efficiency99.99 %
    Noise LevelBelow 70 db
    Frequency50/60 Hz
    Illumination700 Lux
    Country of OriginMade in India

    Designed with precision, the Dispensing Booth is ideal for Operator Protection, Product Protection, and Environment Protection. Based on the smooth working profile and high-end performance of our Reverse Laminar Air Flow, we are ranked amidst notable Reverse Laminar Air Flow Manufacturers, Suppliers and Exporters from India. Furthermore, Reverse Laminar Air Flow can be customized to suit the precise requirements of the clients.

    Specifications :
    • Maximum protection from airborne contaminants produced at the time of powder handling operations such as charging, sampling, and dispensing
    • Powder coated Mild Steel, SS 304 / SS 316 / SS 316L or a combination of both
    • Downflow booth functions on a recirculatory airflow principle
    • At the base of the rear wall, there is Prefilter to capture the airborne generated contaminants. Intake velocity at prefilters increases to offer scavenging effect
    • The continuous, clean, laminar down flow of Class 100 air supplied to the work area in order to suppress
    • Any dust clouds produced during open powder processing
    • And eradicate and capture airborne particles from the operator's breathing zone
    • Triple Stage filtration
    • EU6 – Prefilter (95% down to 5 microns)
    • EU14 - HEPA Filter – Supply (99.999% down to 0.3 microns)
    • EU7 – INTERMEDIATE FILTER – Supply / Exhaust (95% down to 3 microns)
    • Balanced Motor-blower with suspension arrangement for diminishing the noise level
    • Internal covings for easy cleaning
    • SS 304 Double walled Side Panels
    • DOP Test port at upstream of HEPA filter

    Differential Pressure Gauge :
    • 3 Nos to monitor pressure drop across three stages of filters.
    • On / Off Switch for Motor
    • 5/15 Amp Switch Socket for external equipment
    • Fluorescent Light with Milky White Diffuser
    Yes! I am Interested

    Door Air Curtains

    REQUEST CALLBACK

    Door Air Curtains
    • Door Air Curtains
    • Door Air Curtains
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 19,500 / PieceGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Piece
    Noise Level<70 dB
    CertificationCE
    Door Sizeupto 12ft
    Usage/ApplicationIndustrial Usage
    Air Velocity>20-22 m/s
    MountingWall Mount
    Blower Materialaluminium
    I Deal InNew Only
    BrandSaiclave
    Country of OriginMade in India

    Construction - The fan shall be of bolted and riveted construction utilizing corrosion resistant fasteners. Housing shall be minimum 18 gauge aluminum. An adjustable intake louver shall be provided to control airflow. Four adjustable nozzle deflector blades shall provide a properly balance direction of airflow allowing compensation for draft conditions through open doorways. Integral hanging brackets shall be provided for wall installation. Unit shall be shipped in ISTA Certified Transit Tested


    Packaging.

    • Blower - blower shall be centrifugal forward curved type, constructed of galvanized steel. blower shall be balanced in accordance with AMCA Standard 204-96, Balance Quality and Vibration Levels for Fans.
    • Motor - Motor shall be minimum ½ HP, heavy duty resilient mount ODP type with permanently lubricated sealed ball bearings and thermal overload protection. Motor shall be 115 volt single phase.

     


    Additional Information:

  • Delivery Time: 10-15 days
  • Yes! I am Interested

    Tissue Culture Rack

    REQUEST CALLBACK

    Tissue Culture Rack
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 42,000 / UnitGet Latest Price

    Product Brochure
    Product Details:
    Minimum Order Quantity1 Unit
    Usage/ApplicationHospital
    ColorSilver
    Product TypeStorage Rack
    DesignModern
    Surface TreatmentPaint Coated
    MaterialSteel
    BrandSaiclave
    Load Per Layer0-50 kg

    Our organization is indulged in offering Tissue Culture Rack to our clients. The unique design of the racks prevent the of flasks tipping one over the other. This rack has grips on both the ends that make handling easy and allow for safe transport of flasks to the incubator.
    Yes! I am Interested

    Garment Storage Cabinets

    REQUEST CALLBACK

    Product BrochureApprox. Rs 65,000 / PieceGet Latest Price

    Product Brochure

    Product Details:

    Minimum Order Quantity1 Piece
    PowerElectric
    Usage/Applicationclean room
    MaterialStainless Steel
    Size600mm x 450mm x 900mm
    Frequency50/60 Hz
    PhaseSingle Phase
    Country of OriginMade in India

    Garment Storage Cabinets find usage in meeting the demands of storing clean garments for clean rooms. With maintaining clean room environment, these come equipped with HEPA filters as well as ultraviolet germicidal tubes that ensures complete safety of the garments from bacterial contamination.

    For efficient performance, the system come constructed using stainless steel 304 grade metal support and features wire mesh based perforated storage shelving support.

    Features :

    • System also comes equipped with fluorescent tube, UV germicidal tubes, HEPA filter, motor assembly, pre-filter, manometer as well as door coming with glass view support
    • System providing working using 220/230v ac, 50/60hz electrical supply support.


    Additional Information:

  • Delivery Time: 10-15 Days
  • Packaging Details: wooden or Foam

  • Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Abhishek Singh (Proprietor)
    Sai Technology
    C188, Sector 1, Bawana
    New Delhi - 110039, Delhi, India
    Call Us: 
    Call Response Rate: 77%
    Share Us :



    Home  |   Company Brief   |  Our Products  |  Site Map  |   Contact Us

    © Sai Technology. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Sai Technology