Sai Technology

Applications:
Our horizontal Steam Sterilizer are widely used in various bulk laboratories/Hospital for their day to day studies on scale sterilization procedures where they give dryness of the sterilized medium a paramount importance and for that our sterilized media is prone to various micro-bacterial and viral infections. Having a specialization in customers’ requirements we have an expert team of making both standard and customized models.
Construction:
Piping: Stainless steel 304/316 grade good quality seamless
Fittings: Stainless steel 316 grade with B.S.P thread
Stand: SS round pipe. Insulation: Rock wool slabs 50 mm thick
Gasket: Silicon joint less
Electrical load – 440 Volts, AC, 3 phase, Industrial water immersion
type Heating elements, 6/9/12/18KW.

Boiler:
Made of thick stainless steel 304/316 plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacement/repair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on a individual pressure gauge.

From our wide consignment, we are offering to our patrons an optimum class variety of Blood Fluid Warmer Cabinet.

A Fluid Warmer or Blood Warmer Cabinet is Medical equipment used in healthcare industry for warming blood products and Fluids at very low temperature range from room temperature to 60 degree Celsius maximum. Standard temperature for warming blood product is 37 degree Celsius with accuracy of typically +/- 0.1 degree Celsius. Yatherm Scientific manufactures and supply standard and customized Fluid warmer cabinet with WHO standards which Complies 21 CFR part 11 for temperature Controller. Sai Technology provides Fluid Warmer Cabinet which uses in warming fluids before use or transfer into the body.

Other Details: 

• Inner Chamber-fully SS316 Gr (jindalmake)
• Outer Body-fully SS304 Gr (jindalmake)
• Gasket- All Silicon Type
• Glass Wool Insulation- 25 Mm
• Punematic Valve-rotex
• Cartridge- 135no. 2
• Heater- 1000w
• Aircylinder- SC50 X25
• Compressor- / /oil Free Noisefree
• Automatic Pressure PLC Control Facility Supply- Main Unit100%
• Ethylene Oxide Cartridge
• Stand To Mount The Machine Compressor
• PLC Controller With Touch Screen HMI

Applications:

Cooling coils for mortuary freezer are placed between foamed-in-place PUF insulation and brazed to Stainless Steel chamber eliminating any chances of FROST FORMATION and choking of evaporator.

Finned tube evaporator with forced air convention for mortuary refrigerator.

Construction:

Outer body of Stainless Steel.

Inner Chamber of Stainless Steel.

High density machine filled HCFC free polyurethane insulation foam (PUF).

Specially designed latch eliminates cooling loss.

Side by side chambers for bigger capacities.

Safety System:

Hi-Low temperature deviation alarm.

Sensor Failure Indication protection.

Start-up delay protection for compressor.

Refrigeration System:

Hi-performance hermetically sealed compressor .CFC-free ECO-FRIENDLY refrigerants.

High density HCFC free polyurethane insulation foam.

Uniformly spread evaporator imparts faster freezing and better performance on conformity of temperature.

Temperature Control:

Temperature controlled through microprocessor based digital indicator-cum-controller.

Temperature range of up to 2°C to 6°C for mortuary refrigerator. 

Alarm when exceeding temperature range.

Membrane keypad for easy and ergonomic use.

Keypad locks to avoid tampering.

Differential key to deference in temperature.

LED digital display.

Ergonomic Design:

Ingenious and reliable design of door lock, for safety.

Easier to open and close door handle.

Removable and adjustable pull out shelves.

Equipped with moveable casters.

Based on the rotating disc-splash plate principal. It produces only super fine particles of micron size, which becomes part of the atmosphere, thereby reaching every corner of the eoom, resulting in Uniform humidity. Due to the upward thrust imparted to the micron size water droplets, by high speed motorized unit they remain suspended in the atmosphere for longer duration of time. The unit is capable of atomizing up to 3 liters of water in an hour at full evaporation in the driest possible ambient condition. The unit has body made up of S.S. A single unit is effective for an enclosed space of volume up to 40 cu. Mtrs. The unit is provided with high speed 2800 RPM motor to run longer Period and the blades are aerodynamically balanced to ensure droplets fumigation. To work on 220/230 volts A.C. Supply.

SALIENT FEATURES & CONSTRUCTION

· Stainless steel inner basket.

· Double walled glass wool insulated.

· Outer body duly painted, electrically interlocked loading & unloading door.

· No space required on sides of the rnachine

· Electrically Controlled protection provided for auto Timing. & auto reversing through Micro Controlled Base Cyclic Timer/ PLC

· Auto Digital Temperature controls.

· All controls front displayed with pilot lamps.

· V-Belt and pulley drive for low torque and high speed.

· Steam radiator/Electric Heaters: made out of coil and aluminum fins for steam heated, or fin type air heating elements for electrically heated machine.

· Centrifugally balanced suction blower mounted directly on to the motor

· Electric, Steam or thermal fluid heated.

 SPECIFICATION

 SALIENT FEATURES & CONSTRUCTION

· Stainless steel inner basket.

· Double walled glass wool insulated.

· Outer body duly painted, electrically interlocked loading & unloading door.

· No space required on sides of the rnachine

· Electrically Controlled protection provided for auto Timing. & auto reversing through Micro Controlled Base Cyclic Timer/ PLC

· Auto Digital Temperature controls.

· All controls front displayed with pilot lamps.

· V-Belt and pulley drive for low torque and high speed.

· Steam radiator/Electric Heaters: made out of coil and aluminum fins for steam heated, or fin type air heating elements for electrically heated machine.

· Centrifugally balanced suction blower mounted directly on to the motor

· Electric, Steam or thermal fluid heated.

We manufacture our exclusive Blood Bank Refrigerators, which are highly efficient & are most versatile unit for any blood bank. Available with us in a cost effective manner and following features:

Features:

• Operating Temperature + 4°C
• Equipped with digital display electronic temperature controller, with an accuracy level of ±0.5°C