Sai Technology

CONSTRUCTIONAL AND SALIENT FEATURES
Inner Chamber is made up of thick non-magnetic steel of 304/316 quality and jacket is made out of rolled steel.
Single door made of rolled steel lined with S.S. sheets has radial locking system.
All units are hydraulically tested upto 40psi.
The space between outer cover made of thick rolled steel sheet and the steam jacket is filled with asbestos sheet or glass wool to minimize thermal losses.
Boiler is made of thick stainless steel sheet and is located under the sterilizer.
Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.
Unit is also fitted with low-water level cut-off device and automatic pressure control device.
All rectangular sterilizes are fitted with SELF LOCKING SAFETY DOOR device.
The door cannot be opened when chamber is under pressure.
Two separate valves are provided for evacuating steam from inner chamber and jacket, as and when desired.
Fitted with safety valve as a safety device.
Drain valve is fitted at the side bottom for easy draining/cleaning.
Fitted with vacuum breaker to break vacuum in case of formation of vacuum due to steam condensation.
Triple Walled with Steam Jacket and Separate Boiler. Sterilization cycle is controlled by Multiport Valve. The unit is fitted with all standard accessories.
To work on 440 volts, 3 Phase, A.C. Supply.
 
Technical Specifications & Ordering Informations,
 
MODEL#SAI-180#SAI-240#SAI-320#SAI-430Inner Dimensions (WXHXD) (mm)450X450X900
450X600X900
600X600X900
600X600X1200
Capacity180 ltrs
240 ltrs
320 ltrs
430 ltrs
Heater load12.0 KW
18.0 KW
18.0 KW
18.0 KW

 Sai Technology is claiming to be the largest manufacturer of autoclave. especially working on its build up, this has an inner chamber, made out of the finest quality of stainless steel of 304 grades. Body of the outer chamber is made of thick mild steel furnished with hammer toned paint as well as coated with stainless steel.